| Stickist.com https://www.stickist.com/ |
|
| In case anyone cares ... https://www.stickist.com/viewtopic.php?f=4&t=16960 |
Page 1 of 1 |
| Author: | gpoorman [ Fri Feb 16, 2024 10:55 am ] |
| Post subject: | In case anyone cares ... |
Many many years ago I was into model railroading. I would buy spools of "ribbon rail" (flexible track that came in long lengths where you cut the pieces you need) and every hobby store on the planet sold these "rail nippers" for clean precise rail cutting. As it turned out they were just general purpose diagonal cutters. So the railroad is gone ... but ... I've used these for string cutting ever since and they work extremely well. Mine are getting on in years and I managed to find and order the exact same ones. https://www.amazon.com/Premier-Box-Joint-Diagonal-Cutters/dp/B00065DZCE/ref=sr_1_1?crid=1YNA8ZK79CJ3W&keywords=mascot+diagonal+cutters&qid=1708105716&sprefix=mascot+diagonal+cutters%2Caps%2C102&sr=8-1 |
|
| Author: | begin again [ Fri Feb 16, 2024 11:33 am ] |
| Post subject: | Re: In case anyone cares ... |
Here's a little diagram on the edge profiles for an understanding of what's going on (you can also ask for "flush cutters" which is sort of a disambiguation) https://www.kleintools.com/blog/cutting ... ein-pliers I worked as a fret jockey (similar to a pump jockey...guitar grunt) through school and my boss always had me backwrap and then just wiggle the free end which would break the string off flush at the wrap. It's what I'm used to (It must be right b/c it's what I'm used to...I've become a bitter MAWG!!!) has anyone tried newer school locking tuners? I'm out of date (Washburn wonderbar!) I've never played with them at all |
|
| Author: | begin again [ Fri Feb 16, 2024 11:39 am ] |
| Post subject: | Re: In case anyone cares ... |
BTW I still think Frantic (in all its various incarnations) is a friggin masterpiece |
|
| Author: | begin again [ Fri Feb 16, 2024 12:01 pm ] |
| Post subject: | Re: In case anyone cares ... |
BTW I still think Frantic (in all its various incarnations) is a friggin masterpiece |
|
| Author: | WerkSpace [ Fri Feb 16, 2024 12:44 pm ] |
| Post subject: | Re: In case anyone cares ... |
I've always modified my standard cutters with a 1X30 belt sander and then tempered the cutting edges to handle the harder wire that would normally destroy a store bought flush cutter. I find it easier to make my own tools rather than pay outrageous prices for inferior products from China. |
|
| Author: | gpoorman [ Fri Feb 16, 2024 1:09 pm ] |
| Post subject: | Re: In case anyone cares ... |
WerkSpace wrote: I've always modified my standard cutters with a 1X30 belt sander and then tempered the cutting edges to handle the harder wire that would normally destroy a store bought flush cutter. I find it easier to make my own tools rather than pay outrageous prices for inferior products from China. Mascot tools are made in Switzerland. Mine are over 30 years old and still cut through the thickest bass strings. I started searching for a second pair after the recent of however many times I misplaced them for days at a time. |
|
| Author: | begin again [ Fri Feb 16, 2024 2:06 pm ] |
| Post subject: | Re: In case anyone cares ... |
I use a sword I found in a cave after escaping from being a gladiator for James Earl Jones' snake cult ....let me tell of you the days of high adventure |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|