Stickist.com
https://www.stickist.com/

Wanted - TAGG Interface
https://www.stickist.com/viewtopic.php?f=5&t=16826		 Page 1 of 2
Author:  garthpaine [ Thu Oct 12, 2023 12:34 pm ]
Post subject:  Wanted - TAGG Interface
Hi everyone

I am looking for a TAGG interface so I can play my 12 string grand standing and so it can be ready when I am. I have the cymbal/snare stand already so just need the magic top part.
I am in Phoenix, AZ, USA.
thanks, Garth
Author:  snoitan [ Tue Dec 05, 2023 5:10 pm ]
Post subject:  Re: Wanted - TAGG Interface
I believe these aren’t in production anymore, but if anyone is looking to sell theirs, I would be interested as well.
Author:  WerkSpace [ Tue Dec 05, 2023 7:11 pm ]
Post subject:  Re: Wanted - TAGG Interface
Perhaps Brian might add this to his Stick accessory line?
https://brianbaggettwoodcraft.ca/chapma ... -lap-bars/
It might be worthwhile asking.
Email baggetthouse@gmail.com, call/text 1-306-331-7736

snoitan wrote:
I believe these aren’t in production anymore, but if anyone is looking to sell theirs, I would be interested as well.
Author:  DavidWS [ Wed Dec 06, 2023 2:34 am ]
Post subject:  Re: Wanted - TAGG Interface
WerkSpace wrote:
Perhaps Brian might add this to his Stick accessory line?

I understand that things may be happening 'behind the scenes' TAGG wise...
Author:  baggetthouse [ Wed Dec 06, 2023 8:53 pm ]
Post subject:  Re: Wanted - TAGG Interface
WerkSpace wrote:
Perhaps Brian might add this to his Stick accessory line?
https://brianbaggettwoodcraft.ca/chapma ... -lap-bars/
It might be worthwhile asking.
Email baggetthouse@gmail.com, call/text 1-306-331-7736


My apologies. Replicating these TAGGs has been on my to do list. And one fine acquaintance from this site has sent me one to model. I haven't got to it yet due to other shop/work commitments, plus lack of a tool or two needed to make these proper...namely a drill press. Although I might fake it with a hand drill. I don't know yet.

If there's enough interest here, that might light a fire under me to get going within the next couple of months... ;)
Author:  WerkSpace [ Wed Dec 06, 2023 9:45 pm ]
Post subject:  Re: Wanted - TAGG Interface
baggetthouse wrote:
Lack of a tool or two needed to make these proper...namely a drill press.
Although I might fake it with a hand drill. I don't know yet.

If you want a very portable option, the all metal drill guide looks pretty good.
https://www.amazon.ca/Self-Centering-Ex ... 0C7QN2K18/
https://www.amazon.com/Multi-Angle-All- ... B0CHP2X316
21Dec2023 UPDATE: I got mine from Amazon today. It looks to be well made and well designed, but the spindle bearings are loose. They used a cylindrical needle bearing arrangement. I'm going to replace these bearings with some custom brass bushings made on my Taig micro-lathe. Other than the bearing issue, I'm very happy with the overall product.

For wood working, I prefer using Forstner bits.
https://www.amazon.ca/Freud-FB-011-2-In ... B00004RK4X
Author:  DavidWS [ Thu Dec 07, 2023 2:33 am ]
Post subject:  Re: Wanted - TAGG Interface
WerkSpace wrote:
If you want a very portable option, the all metal drill guide is pretty good.

Giving the guide its own chuck is an interesting alternative to needing to clamp the whole drill, as is usual with most solutions that don't have a built in drill.

This seems to be the UK equivalent offer
https://www.amazon.co.uk/maxant-Mobile-Protractor-Aluminum-Woodworking/dp/B0C7C81KW7
Author:  baggetthouse [ Thu Dec 07, 2023 9:43 am ]
Post subject:  Re: Wanted - TAGG Interface
WerkSpace wrote:
If you want a very portable option, the all metal drill guide is pretty good.


Many thanks WerkSpace. I will look into this. I didn't know this existed.
Author:  WerkSpace [ Thu Dec 07, 2023 12:34 pm ]
Post subject:  Re: Wanted - TAGG Interface
Here's an old video of what the TAGG interface looks like.
Author:  rcneville [ Mon Dec 11, 2023 2:37 pm ]
Post subject:  Re: Wanted - TAGG Interface
I have one I have never got into using. New condition. Message me if you are interested. I’m in BC, Canada.

Robert
Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/