| Stickist.com https://www.stickist.com/ |
|
| Finally! Stickless no more https://www.stickist.com/viewtopic.php?f=2&t=15845 |
Page 3 of 3 |
| Author: | hading [ Wed Nov 03, 2021 10:38 am ] |
| Post subject: | Re: Finally! Stickless no more |
DavidWS wrote: Is the number (stamped?) on the aluminium 'beam' or on the headstock? If it's on the beam I suppose a clue to sequence would be if the serial number itself is anodised? On mine the serial number is between the nut and the damper. |
|
| Author: | txtouchguitarist [ Wed Nov 03, 2021 2:00 pm ] |
| Post subject: | Re: Finally! Stickless no more |
"Is the number (stamped?) on the aluminium 'beam' or on the headstock? If it's on the beam I suppose a clue to sequence would be if the serial number itself is anodised?" My former Railboard had the serial number on the top front of the headstock. |
|
| Author: | hading [ Wed Nov 03, 2021 2:06 pm ] |
| Post subject: | Re: Finally! Stickless no more |
txtouchguitarist wrote: "Is the number (stamped?) on the aluminium 'beam' or on the headstock? If it's on the beam I suppose a clue to sequence would be if the serial number itself is anodised?" My former Railboard had the serial number on the top front of the headstock. The location I mentioned is on the beam. I kind of thought I had previously seen it elsewhere as well, perhaps on the headstock, but when I examined it to answer this question I only saw it between the nut and damper, and I did look on the headstock. On the other hand, I'm not very observant, so I might have missed it. |
|
| Author: | DavidWS [ Wed Nov 03, 2021 2:50 pm ] |
| Post subject: | Re: Finally! Stickless no more |
hading wrote: when I examined it to answer this question I only saw it between the nut and damper, and I did look on the headstock. Thank you. I think I can just about make out a couple of digits (28, which would make sense) on RC's 4th image? |
|
| Author: | RandomCrap [ Wed Nov 03, 2021 7:17 pm ] |
| Post subject: | Re: Finally! Stickless no more |
Ah, yes - stamped between the head and the damper strip. |
|
| Page 3 of 3 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|