| Stickist.com https://www.stickist.com/ |
|
| Electronic buzzing when using stereo output https://www.stickist.com/viewtopic.php?f=7&t=4673 |
Page 1 of 1 |
| Author: | CrumbledFingers [ Sun Nov 27, 2011 6:45 pm ] |
| Post subject: | Electronic buzzing when using stereo output |
I recently bought a stereo TRS 1/4" male to 2x mono 1/4" female adapter for my NS/Stick. No matter what cables I use, the melody side (red) emits an abrasive static-like buzz, but only when a cable is plugged into the bass side (black) as well. In other words, when I unplug the instrument cable from the black side of the adapter, the buzzing on the red side stops. I feel like something isn't grounded properly when both are plugged in. Should I be using a different setup, i.e. is there some reason only a full-length splitter cable would work as opposed to 2 cables going into my merger adapter? |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|